金沙js娱乐场注册送37

澳门金沙国际唯一授权

激光整平机设计厚度解读
发布日期:2017-12-15
施工过程中不变形、不串动和如何控制激光整平机设计厚度、平整度、横坡度纵向高程等技术指标。为达到目的,大家破旧立新,吸取应用新的先进技术,采用新的工艺。
 
In the course of construction, no deformation, no movement and how to control the design thickness, evenness and vertical elevation of the horizontal slope of concrete. In order to achieve the purpose, we Pojiulixin, absorption and application of new advanced techniques, the use of the new technology.
 
激光整平机清理桥面的方法。原桥面经过梁板安装、绞缝灌混凝土等工序。这些工序完成后,桥面残留有杂物、砂浆、混凝土块等。
 
A method of cleaning the bridge surface by a laser leveling machine. The original deck passes through the installation of beam and plate, and the concrete is filled with the seam. After the completion of these processes, there are debris, mortar and concrete blocks remaining on the deck.
 
施工放样采用网格式密集布设桩点型式放样为解决钢筋网空间位置定位和锚固定位控制,摊铺整平机行走轨道高程控制、混凝土混合料厚度控制,施工放样采用网格式密集布设点形式放样。
激光整平机
The construction lofting is in the form of dense mesh layout, pile location and type lofting, for the purpose of solving the space location and anchoring positioning control of reinforcing steel net, the height control of paving machine's walking track, the control of the thickness of concrete mixture, and the lofting of network layout for the construction lofting.
 
激光整平机清理技术要求。A.杂物扫干净;B.残留附着混凝土和砂浆凿除干净;C.用高压水冲洗表面,不得残留砂尘。
 
Laser leveling machine cleaning technical requirements. A. sundries sweep clean; B. residue attached concrete and mortar chisel clean; C. with high pressure water rinse the surface, no residual sand dust.
 
因此,激光整平机在桥面铺装前必须清理干净,其方法是凿毛、铲、扫、水冲。
 
Therefore, the bridge deck must be cleaned before the pavement, the method is to chisel, shovel, sweep, and water.

上一篇:激光整平机厂家的机器怎么选

下一篇:激光整平机怎么清洗

XML 地图 | Sitemap 地图